Jensen BT1611I Owners Manual - Page 9

BT1611i allowing the radio to stop at a broader range of signals. To set the unit to select only strong local stations during automatic tuning, turn the AUDIO CONTROL to choose "Local". VOL PGM (00-46) Use the "VOL PGM" option to select the default volume the radio will assume when first turned on. To program a specific start-up volume level, turn the AUDIO CONTROL to select the desired level. BEEP TONE The beep tone feature allows the selection of an audible beep tone to be heard each time a button is pressed on the face of the radio. "BEEP TONE On" is the default display. Turn the AUDIO CONTROL to select the "BEEP TONE Off" option. iX-BASS Press the BASS button (15) to activate the iXBASS feature. When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. Press BASS again to deactivate this feature. Subwoofer Press the SUB button (18) to activate the Subwoofer function. Press again to turn the Subwoofer function off. NOTE: The Subwoofer feature only works when an external amplifier and subwoofer are connected via the Sub line out connection on the back of the unit. Liquid Crystal Display (LCD) The liquid crystal display (LCD) panel (8) displays the frequency, time and activated functions of the unit. Detaching the Front Panel To detach the front panel, first press the front panel release button (10) to release the left side of the panel. Next, grasp the released side and pull it off the chassis. After removing the front panel, store it in the supplied carrying case to protect it from dirt and damage. REMOVE FRONT PANEL NOTE: After being subjected to cold temperatures, LCD panels may take longer to respond and visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when the temperature increases to a normal range. Auxiliary Input Use the Aux In cables on the back of the unit to connect a portable media device for playback through the vehicle sound system. To access the Auxiliary Input mode, press the MODE button (2) until "AUX" is indicated in the display. Front Panel Release The front panel release button (10) releases the mechanism that holds the front panel to the chassis. 1 SUB RECORD BT1611 MP3/WMA RECEIVER BASS MENU TUNE / 2 Re-attaching the Front Panel To re-attach the front panel, make sure the electrical terminals on the back of the panel are free of dust and dirt, as debris could cause intermittent operation or other malfunctions. Position the right side of the panel in place so that it is correctly engaged, then lightly press the left side of the panel until the mechanism locks it into place. 9