Kenmore 1776 Use and Care Guide - Page 14

Addng, Items, ©udnq

Page 14 highlights

Light Wash Use this cycle for china and crystal. This cycle uses a light wash and gentle dry. During the heated dry, the heating element cycles on and off. Use covered detergent dispenser section. Wash Main Wash • Rinse or Purge Final Rinse • • Purge Dry Approximate Time • cycled 1,5 hrs* Water Usage (gal/L) 4.8/18.2 Quick Rinse Use this rinse cycle for rinsing dishes, glasses, and silverware that will not be washed right away. Do not use detergent with this cycle. Wash Main Rinse or Final Dry Time Water Wash Purge Rinse (rnin) Usage (gal/L) • Rinse 10 2,2/8.3 * If the incoming water temperature is less than the recommended temperature, the cycle will automatically compensate by adding time and heat as needed. 1. Press CANCEL!DRAIN. The Cancel/Drain light glows. 2. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely. The light turns off after 2 minutes. The door must be closed for the dishwasher to drain, To stop the drain You can press CANCEL!DRAIN again to stop the drain. Remember to drain the dishwasher before starting a new cycle. To clear the indicators Press CANCEL!DRAIN before starting the dishwasher to clear all options and cycles. a Oyce e_°,O_iiIiIZ I?,_ During the first minute of a cycle 1. Select a new cycle and/or options. 2. Check the detergent dispensers. They must be filled properly for the new cycle. 3. The Start/Resume light will flash when the door is opened. Make sure the door is closed. 4. Press START/RESUME. After the first minute of a cycle 1. Press CANCEL!DRAIN. The Cancel/Drain light glows. Your dishwasher starts a 2-minute drain (if needed). Let the dishwasher drain completely. 2. Check the detergent dispensers. They must be filled properly for the new cycle. 3. Make sure the door is closed. The Start/Resume light will flash. 4. Select a new cycle and/or options. 5. Press START/RESUME. Addng Items ©udnq You can add an item anytime before the main wash starts, Open the door and check the detergent dispenser. If the cover is still closed, you can add items. To add items 1. Open the door slightly to stop the cycle. Wait for the spraying action to stop before opening the door. The Start/Resume light will flash. 2. Open the door. If the detergent dispenser cover is still closed, add the item. 3. Close the door firmly until it latches. The Start/Resume light will flash. 4. Press START/RESUME. IMPORTANT: If Lock On is selected, turn off the lock (see Lock On section in "Option Selections"), or the Start/Resume light will continue to flash. .J,,ele, do You can customize your cycles by pressing an option. If you change your mind, press the option again to turn off the option. Select a different option if desired. You can change an option anytime before the selected option begins. For example, you can press an unheated drying option anytime before drying begins. Press START/RESUME to use the same cycle and option(s) as the previous wash cycle. NOTE: If the last cycle you completed was a rinse cycle, when you press START/RESUME, the dishwasher runs the last full wash cycle and options. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

Light Wash
Use this cycle for china
and crystal. This cycle uses a light
wash and gentle dry. During the heated dry, the heating
element
cycles
on and off.
Use covered
detergent
dispenser
section.
Wash
Main
Rinse or
Final
Dry
Approximate
Water
Wash
Purge
Rinse
Time
Usage
(gal/L)
1,5
hrs*
4.8/18.2
Purge
cycled
Quick
Rinse
Use this rinse cycle
for rinsing dishes, glasses,
and silverware
that will not be washed
right away.
Do not use detergent
with this cycle.
Wash
Main
Rinse
or
Final
Dry
Time
Water
Wash
Purge
Rinse
(rnin)
Usage
(gal/L)
10
2,2/8.3
Rinse
*
If
the incoming
water temperature
is less than the
recommended
temperature,
the cycle will automatically
compensate
by adding
time and heat as needed.
1.
Press CANCEL!DRAIN.
The Cancel/Drain
light glows.
2.
The dishwasher
starts a 2-minute
drain (if needed).
Let the
dishwasher
drain completely.
The light turns off after
2 minutes.
The door must be closed
for the dishwasher
to
drain,
To stop the drain
You can press CANCEL!DRAIN
again to stop the drain.
Remember
to drain the dishwasher
before starting
a new cycle.
To clear the indicators
Press CANCEL!DRAIN
before starting the dishwasher
to clear all
options
and cycles.
a Oyce
e_°
,O_iiIiIZ
I?,_
During
the first minute
of a cycle
1.
Select a new cycle
and/or options.
2.
Check the detergent
dispensers.
They must be filled properly
for the new cycle.
3.
The Start/Resume
light will flash when the door is opened.
Make sure the door
is closed.
4.
Press START/RESUME.
After
the first minute
of a cycle
1.
Press CANCEL!DRAIN.
The Cancel/Drain
light glows. Your
dishwasher
starts a 2-minute
drain (if needed).
Let the
dishwasher
drain completely.
2.
Check the detergent
dispensers.
They must be filled properly
for the new cycle.
3.
Make sure the door
is closed. The Start/Resume
light will
flash.
4.
Select a new cycle
and/or options.
5.
Press START/RESUME.
Addng
Items
©udnq
You can add an item anytime
before the main wash starts,
Open
the door and check the detergent
dispenser.
If the cover is still
closed, you can add items.
To add
items
1.
Open the door slightly to stop the cycle. Wait for the spraying
action to stop
before opening the door. The Start/Resume
light will flash.
2.
Open the door. If the detergent
dispenser
cover is still closed,
add the item.
3.
Close the door firmly
until it latches. The Start/Resume
light
will flash.
4.
Press START/RESUME.
IMPORTANT:
If
Lock
On is selected,
turn off the lock (see
Lock
On section
in "Option
Selections"),
or the Start/Resume
light will
continue
to flash.
.J,,ele,
do
You can customize
your cycles
by pressing an option.
If you
change your mind, press the option
again to turn off the option.
Select a different
option
if desired.
You can change
an option
anytime
before the selected
option
begins.
For example,
you can press an unheated
drying option
anytime
before drying
begins.
Press START/RESUME
to use the same cycle
and option(s)
as
the previous wash cycle.
NOTE: If the last cycle you completed
was a rinse cycle, when
you press START/RESUME,
the dishwasher
runs the last full
wash cycle
and options.
14