Kenmore 75062 Owners Manual - Page 4

Observe - installation

Get Kenmore 75062 - 6,000 BTU Single Room Air Conditioner PDF manuals and user guides View all Kenmore 75062 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

OBSERVEALL LOCAL CODES AND ORDINANCES. DO NOT, UNDER ANY CIRCUM8TANCE8, REMOVE THE POWER 8UPPLY CORD GROUND PRONG. ELECTRICAL GROUND IS REQUIRED ON THIS APPLIANCE. A 115-volt 60 Hz, AC only, 15A fused and properly grounded electrical supply is required. A time delay fuse or time delay circuit breaker is recommended. Use a dedicated circuit, serving only this appliance. DO NOT USE AN EXTENSION CORD. RECOMMENDED GROUNDING METHOD For your personal safety, this appliance must be grounded. This appliance has a power supply cord with a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating grounding type wall receptacle and grounded in accordance with the National Electrical Code (ANSI/NFPA 70)latest edition and all local codes and ordinances. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician. 115V~ 230V ~ A2222222222222221 fZ Power cord may include a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician. NOTE: The shape may be different according to its model. Use Wall Receptacle Standard 125V, 3-wire grounding receptacle rated 15A, 125V AC Standard 250V, 3-wire grounding receptacle rated 15A, 250V AC Standard 250V, 3-wire grounding receptacle rated 20A, 250V AC Power Supply Use 15 AMP. time delay fuse or 15 AMP circuit breaker. Use 20 AMP. time delay fuse or 20 AMP circuit breaker. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. -4-

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
OBSERVE
ALL
LOCAL
CODES
AND
ORDINANCES.
DO NOT, UNDER ANY CIRCUM8TANCE8,
REMOVE THE POWER
8UPPLY
CORD GROUND PRONG.
ELECTRICAL
GROUND
IS REQUIRED
ON
THIS
APPLIANCE.
A 115-volt 60 Hz, AC
only,
15A fused and properly grounded
electrical
supply is required. A time
delay fuse or time delay circuit breaker is recommended.
Use a dedicated
circuit, serving only this
appliance.
DO NOT USE AN
EXTENSION
CORD.
RECOMMENDED
GROUNDING
METHOD
For your personal safety, this appliance must be grounded.
This appliance
has a power supply
cord with a 3-prong grounding
plug. To minimize
possible shock hazard, the cord must be plugged
into a mating grounding
type wall receptacle
and grounded
in accordance
with the National
Electrical
Code (ANSI/NFPA
70)latest
edition and all local codes and ordinances.
If a mating wall
receptacle
is not available,
it is the personal responsibility
and obligation
of the customer
to have
a properly grounded
3-prong wall receptacle installed
by a qualified electrician.
115V~
230V ~
A2222222222222221
fZ
Power
cord may include a current
interrupter
device. A test and reset
button is provided
on the
plug case.
The device
should
be tested on a
periodic
basis by first pressing
the TEST
button
and then the RESET
button.
If the TEST
button
does not trip or if the RESET
button will not stay
engaged,
discontinue
use of the air conditioner
and
contact
a qualified
service
technician.
NOTE:
The shape may be different
according
to its model.
Use
Wall
Receptacle
Power
Supply
Standard 125V,
3-wire grounding
receptacle rated
15A, 125V AC
Standard 250V,
3-wiregrounding
receptacle rated
15A, 250V AC
Standard 250V,
3-wiregrounding
receptacle rated
20A, 250V AC
Use 15 AMP. time
delay fuse or 15 AMP
circuit breaker.
Use 20 AMP. time
delay fuse or 20 AMP
circuit breaker.
Electrical
Shock Hazard
Plug into a grounded
3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result
in death, fire, or electrical
shock.
-4-