Kenwood DDX7018BT Instruction Manual - Page 31
Bluetooth mobile phone, Changing the device name of the unit, displayed on the paired device
View all Kenwood DDX7018BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Bluetooth® Changing the device name of the unit displayed on the paired device 1 Display the screen. On the Home screen, touch as follows: Bluetooth mobile phone When a call comes in... During a call... Then, on the screen, touch [Bluetooth]. On the screen, touch [Device Name]. 2 Enter the device name (1), then confirm the entry (2). • To clear the last entry, touch [BS]. • To move the entry position, touch [H]/[I]. Touching the operation keys performs the following actions: [ ] Answers a call. [ ] [Speech Quality] Rejects a call. Displays the screen. • Microphone Level: Adjusts the microphone volume level. (-10 to 10, initial: 0) • Echo Cancel Level: Adjusts the echo volume level. (OFF, -5 to 5, Initial: 0) • Noise Reduction Level: Adjusts the noise reduction volume. (OFF, -5 to 5, Initial: 0) • Call information is displayed if acquired. • Phone operation is not available while the picture from the view camera is displayed. Touching the operation keys performs the following actions: [ ] [ ] Ends a call. Mutes the volume of the microphone. [ ]/ Switches between hands free mode [ ] and phone mode. [DTMF] [Speech Quality] Enters DTMF (Dual Tone Multi Frequency), then sends text using the keypad. Displays the screen. • See the left column for details. ENGLISH 29