Kenwood DDX7018BT Instruction Manual - Page 52
For DMX7018BT/DMX7018BTM
View all Kenwood DDX7018BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Installation and Connection For DMX7018BT/DMX7018BTM [ STEERING REMOTE ' *1 Gray/Red ST REMOTE GND Bright green/Red Input 1 Purple/Red Input 2 Connect to your vehicle's steering remote harness. Contact your KENWOOD dealer for details. 10 A fuse ¥ White ] / White with black stripe [ Gray ] / Gray with black stripe [ Green ] / Green with black stripe [ Purple ] / Purple with black stripe [ Brown Orange with white stripe Light blue with yellow stripe Blue with white stripe (12 V 350 mA) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) 50 ENGLISH Connect the antenna cord to the antenna terminal. Purple with white stripe REVERSE To the car's reverse lamp harness when using the optional rear view camera Light green PRK SW USB input terminal (1 m) Extension wire ( ø ) To the car's parking brake detection switch harness (For best safety, be sure to connect the parking sensor.) MUTE ILLUMI STEERING WHEEL REMOTE INPUT REMOTE CONT ANT.CONT P.CONT To front speakers/mid range speakers*2 (left) To front speakers/mid range speakers*2 (right) To rear speakers/tweeters*2 (left) *1 Only for DMX7018BT Australian/New Zealand models/DMX7018BTM. *2 For 3-way speaker system connection, see page 48. To rear speakers/tweeters*2 (right) Not used. To the car light control switch To the OE remote adapter (not supplied) which is compatible with your car To the power control terminal when using the optional power amplifier (Or) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Ignition key switch Car fuse To the car chassis Car battery