Kenwood DDX7018BT Instruction Manual - Page 54
For Dmx718wbt/dmx718wbtm
View all Kenwood DDX7018BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Installation and Connection For DMX718WBT/DMX718WBTM 10 A fuse STEERING REMOTE [ % % % Connector D: To the car's steering remote harness • Depending on the type of vehicle, it cannot be connected. ' Connect the antenna cord to the antenna terminal. ¥ Blue with white stripe (12 V 200 mA) P.CONT Brown MUTE 52 ENGLISH Purple with white stripe Light green REVERSE PRK SW USB input terminal (1 m) To the car's reverse lamp harness when using the optional rear view camera Extension wire ( ø ) To the car's parking brake detection switch harness (For best safety, be sure to connect the parking sensor.) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Not used. Connector B: To the car's harness Connector A: To the car's harness Pin A1 Orange/White A2 Yellow A3/A5 Blue Color and Function Dimmer Battery Antenna control (12 V 300 mA) A4 Red Ignition (ACC) A6 Black Ground connection A7/A8 White with black stripe [ / White ] Left speaker (front/mid range*) A9/A10 Gray with black stripe [ / Gray ] Right speaker (front/mid range*) B1/B2 Green with black stripe [ / Green ] Left speaker (rear/tweeter*) B5/B6 Purple with black stripe [ / Purple ] Right speaker (rear/tweeter*) D21 White Input 1 D22 Red Input 2 D23 Black Ground * For 3-way speaker system connection, see page 48.