Kenwood M-7000S Operation Manual - Page 60
Troubleshooting, Maintenance and care
View all Kenwood M-7000S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
26. Troubleshooting Please check the following points in case of malfunctions: No sound Plug in the power adapter properly. Adjust the volume to the correct level. Make sure the desired source is selected. The system does not respond at the touch of a button Unplug the AC adapter and reconnect it. Problems with radio reception Reorient the antenna. Find a more suitable location. Other electrical appliances interfere with the reception. Location not suitable for receiving DAB + signals. A network connection cannot be established Check the WLAN function, make sure the password is correct. Try to set an IP address on the device. Activate the DHCP function on the router and re-establish the connection on the device. A firewall is activated in the network - set it so that access is possible. Place the radio closer to the router or AP. Restart the router or AP. 27. Maintenance and care Cleaning the housing Use a cloth lightly moistened with a mild detergent. Do not use detergents containing alcohol, ammonia or scouring agents. Cautions on condensation Condensation (dew) may form inside the unit if there is a significant difference between the temperature of the unit and the ambient temperature. If condensation occurs inside the unit, proper function is no longer guaranteed. In this case, you have to wait a few hours; After the moisture has dried, the device can be reused. Special care should be taken in the following circumstances When the unit is moved from one place to another at a much higher or lower temperature, or when the humidity at the installation site increases, etc. Handling of CDs Hold the CD so that you do not touch the signal surface. (The unprinted side is the playing side.) Use only use CDs with erly. marking. In some cases, CDs with this marking may not play back prop- 28