Kenwood NX-3320 User Manual - Page 35
Priority Channel Editing, Scan Program]
View all Kenwood NX-3320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
o Priority Channel Editing If the Priority channel (Priority 1/ Priority 2) has been set as Operator Selectable by your dealer, you can reprogram the Priority channels. Note: ● A zone/ channel must be added to the scan list before the channel can be set as a Priority channel. 1 Select the channel where the scan list to be edited has been set, press the button programmed as [Scan Program] to enter Scan Program Mode. Alternatively, press the button programmed as [Menu] to enter Scan Program Mode using the Menu Mode. 2 Press the [ ] button to edit the Priority channel. 3 Press the [J] and [K] buttons to select the desired priority. 4 Press the [ ] or [ ] button to confirm your selection. 5 Press the [ ] button to exit scan programming. 35
o
Priority Channel Editing
If the Priority channel (Priority 1/ Priority 2) has been set as Operator Selectable by
your dealer, you can reprogram the Priority channels.
Note:
●
A zone/ channel must be added to the scan list before the channel can be set as a Priority
channel.
1
Select the channel where the scan list to be edited has been set, press the button
programmed as
[Scan Program]
to enter Scan Program Mode.
Alternatively, press the button programmed as
[Menu]
to enter Scan Program Mode using
the Menu Mode.
2
Press the [
] button to edit the Priority channel.
3
Press the [
J
] and [
K
] buttons to select the desired priority.
4
Press the [
] or [
] button to confirm your selection.
5
Press the [
] button to exit scan programming.
35