Kenwood NX-3320 User Manual - Page 39
EMERGENCY CALLS, Emergency]
View all Kenwood NX-3320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
EMERGENCY CALLS If your transceiver has been programmed with the Emergency function, you can make emergency calls. Note: Portable ● Only the Auxiliary (orange) button and the PF 1 (orange) button of the optional speaker/ microphone can be programmed with the Emergency function. (NX-3200/ NX-3300 only) Mobile ● Only the Auxiliary ( ) button can be programmed with the Emergency function. 1 Press and hold the button programmed as [Emergency]. ● Depending on the delay time programmed into your transceiver, the length of time you must hold the Emergency button will vary. ● When the transceiver enters Emergency mode, the transceiver will change to the Emergency channel and begin transmitting based on how the transceiver is set up by your dealer. Transmit periods are also set by your dealer. 2 To exit Emergency mode, press and hold the [Emergency] button again. ● If the Emergency mode completes a preset number of cycles, Emergency mode will automatically end and the transceiver will return to the zone and channel that was in use before Emergency mode was entered. Note: ● Your dealer can set the transceiver to emit a tone when Emergency mode starts and stops. ● Your dealer can set the transceiver to emit tones and received signals as normal or mute the speaker during Emergency operation. 39