Kenwood XD-355 User Manual 1 - Page 10

EX.BASS /DEMO • 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar) 30 30 Demo mode When the AC power cord is first connected, the unit will enter the demonstration mode. To cancel the demonstration mode : Press the EX.BASS/DEMO button. • The demonstration mode will be cancelled and the unit will be in the low power consumption mode. To return to the demonstration mode : When the unit is in the standby mode, press the EX.BASS/DEMO button again. Notes : • When the unit is in the low power consumption mode, the display will disappear. • When the power is on, the EX.BASS/DEMO button can be used to select the extra bass mode. Remote control • When inserting or removing the batteries, push them towards the battery terminals. • Installing the batteries incorrectly may cause the unit to malfunction. Precautions for battery use : • Replace all old batteries with new ones at the same time. Do not mix old and new batteries. • Remove the batteries if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage. • Do not use rechargeable batteries (nickelcadmuim battery, etc.) Note concerning use : • Replace the batteries if the operating distance is reduced or if the operation becomes erratic. • Periodically clean the transmitter LED on the remote control and the sensor on the main unit with a soft cloth. • Exposing the sensor on the main unit to strong light may interfere with operation. Change the lighting or the direction of the unit. • Keep the remote control away from moisture, excessive heat, shock, and vibrations. 10 EN