Kenwood XD-355 User Manual 1 - Page 25
ASPM(Auto Station Programme Memory), Press the TUNER BAND button.
![]() |
View all Kenwood XD-355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
4 2,3 1 4 (4 seconds) (4 seconds) ASPM (Auto Station Programme Memory) It is recommended that you store stations in memory using ASPM. (This memory can be used for PTY searches, and station select.) When the AUTO MEMORY button is pressed, whilst turned to the FM band, the RDS function will automatically search for new RDS stations. Up to 40 stations can be stored in memory. (If you have already stored some stations in memory, the number of new stations you can store will be less.) 1 Press the POWER button to turn the power on. 2 Press the TUNER (BAND) button. 3 Press the TUNER (BAND) button to select the FM ST or FM band. 4 Press and hold down the AUTO MEMORY but- ton for at least 3 seconds. 1 After "ASPM" has flashed for about 4 seconds, scanning will start. (87.50 - 108.00 MHz) 2 When an RDS station is found, the RDS will ap- pear for a short time and the station will be stored in memory. 3 After scanning, the number of stations that have been automatically stored in memory will be displayed for 4 seconds, and then "END" will appear for 4 seconds. Notes : • Only RDS stations will be stored in memory in numerical order. • If the same station is broadcasting on different frequencies, the transmission with the strongest broadcast frequency will be stored in memory. • Any station which has the same frequency as one which has been already stored in memory will not be stored again. • The ASPM operation can be repeated until "END" appears. • If a 40th station is stored in memory during a scan, the scanning will stop at that station. The number of stations and "END" will each be displayed for 4 seconds. • If no stations have been stored in memory, "END" will appear for about 4 seconds. 25 EN
![](/manual_guide/products/kenwood-xd355-user-manual-292bab8/25.png)