Kenwood XD-355 User Manual 1 - Page 17

7 STOP 7 P.CALL 4 1 ¡ ¢ P.CALL 41 ¡¢ Cue and review 1 Load a disc and begin playback. 2 Hold down the P. CALL ¡ ¢ button for audi- ble fast forward, and hold down the P. CALL 4 1 button for audible fast reverse. 3 Normal playback will resume when the P. CALL 4 1 or ¡ ¢ button is released. Notes : • When the end of the disc is reached whilst cueing, "END" will appear in the display and CD operation will be paused. (Even though the next disc has been loaded, the disc will not be switched.) Press the P. CALL 4 1 button for fast reverse or press the 7 STOP button to stop CD operation. • If the beginning of the disc is reached whilst reviewing, the mode will automatically switch to normal playback at that point. 7 STOP 3 7 3 Repeat play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. To repeat all tracks on up to 3 discs : Press the 3 button twice. • "RPT." will light up. To repeat a programmed sequence : 1 Programme a sequence of up to 32 tracks. (see page 18) 2 Press the 3 button again. • "RPT." will light up. To cancel repeat play : Press the 3 button again. • "RPT." will goes off. Note : • When using repeat play, be sure to press the 7 STOP button after you are through listening. Otherwise, the CD(s) will play continuously. 17 EN