Kenwood XD-355 User Manual 1 - Page 16

7 3 3 16 EN RANDOM P.CALL 41 ¡¢ 3 Random play (Remote control operation) The tracks on the disc(s) can be played in random order automatically. 1 Load a disc(s) and close the disc tray. 2 Press the RANDOM button to begin random play. • "RDM" will light up. Notes : • If you press the P. CALL ¡ ¢ button during random play, you can move to another track. On the other hand, the P. CALL 4 1 button does not allow you to move to the previous track. The beginning of the track being played will be located. • When using random play, be sure to press the 7 STOP button after you are through listening. Otherwise, the disc(s) will play continuously. • In random play the unit will select and play tracks automatically. (You cannot select the order of the tracks.) To cancel random play : Press the 3 button. P.CALL 4 1 ¡ ¢ P.CALL 41 ¡¢ Tracks Skipping Tracks skipping will automatically locates the beginning of any track. To listen again to the track being played : Press the P. CALL 4 1 button for less than 0.5 second during playback. To move to the beginning of the next track : Press the P. CALL ¡ ¢ button for less than 0.5 second during playback. • To skip a number of tracks at one time, press the P. CALL 4 1 or ¡ ¢ button repeatedly until the desired track number is shown. • To start playback from a desired track, press the P. CALL 4 1 or ¡ ¢ button whilst in the stop mode to select the track number, and then press the 3 button. Note : Tracks skipping can only search for music on a single disc.