Kenwood XD-355 User Manual 1 - Page 36

USING EXTERNAL UNITS, Video/Auxiliary (Audio signal) input, Headphones

Get Kenwood XD-355 PDF manuals and user guides View all Kenwood XD-355 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

USING EXTERNAL UNITS To the line output socket RCA cord Video/Auxiliary (Audio signal) input To listen to or record signals from external sources through this unit : 1 Use a separately available RCA cord to connect the desired external unit to the VIDEO/AUX sockets. (red = right channel, white = left channel) • When using video equipment (Laser Disc player or VCR), be sure to connect the audio output to this unit and the video output to a television. 2 Press the ON/STANDBY button to turn the power on. 3 Press the VIDEO/AUX button. 4 Operate the external unit. 5 To record the sound from the external unit, per- form steps 2 - 4 of the "Recording from the built-in radio" section on page 31. Note : • To prevent hum interference, do not place this unit near a television receiver. Headphones • Before plugging in or unplugging the head- phones, make sure the volume level is reduced. • Be sure your headphones have a 3.5mm (1/8") diameter plug and are between 16 Ω and 50 Ω impedance. The recommended impedance is 32 Ω. • When headphones are connected, the speak- ers are disconnected automatically. Adjust the VOLUME CONTROL for the desired volume. 36 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
36
EN
USING EXTERNAL UNITS
Video/Auxiliary (Audio signal) input
To listen to or record signals from external sources
through this unit :
1
Use a separately available RCA cord to connect
the desired external unit to the VIDEO/AUX
sockets.
(red = right channel, white
= left channel)
•
When using video equipment (Laser Disc player
or VCR), be sure to connect the audio output to
this unit and the video output to a television.
2
Press the
ON/STANDBY button to turn the
power on.
3
Press the VIDEO/AUX button.
4
Operate the external unit.
5
To record the sound from the external unit, per-
form steps
2
-
4
of the “Recording from the
built-in radio” section on page 31.
Note :
•
To prevent hum interference, do not place this
unit near a television receiver.
Headphones
•
Before plugging in or unplugging the head-
phones, make sure the volume level is reduced.
•
Be sure your headphones have a 3.5mm (1/8”)
diameter plug and are between 16
Ω
and 50
Ω
impedance. The recommended impedance is
32
Ω
.
•
When headphones are connected, the speak-
ers are disconnected automatically. Adjust the
VOLUME CONTROL for the desired volume.
To the line output socket
RCA cord