KitchenAid KGRA806PSS Use and Care Guide - Page 9

TripleTier™ Flame Burner with InstaWok™ Ring A C Surface Burners IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges. Before cleaning, make sure all controls are off and the oven and cooktop are cool. Do not use oven cleaners, bleach or rust removers. Burner Cap Alignment Always keep the burner cap in place when using a surface B burner. A clean burner cap will help prevent poor ignition and uneven flames. Always clean the burner cap after a spillover and D routinely remove and clean the caps according to the "General Cleaning" section. TripleTier™ Flame Burner A. InstaWok™ Ring B. Grid base C. Wok supports pointing down (for use with flat-bottomed cookware) D. Support guides The TripleTier™ Flame Burner with InstaWok™ Ring is a multifunction burner that produces everything from a rapid boil down to a low simmer. The TripleTier™ Flame Burner with InstaWok™ Ring is functioned by a dual valve control knob, which controls two separate burners. See "TripleTier™ Burner with High Power Settings and Low Power Simmer Settings" section. The InstaWok™ Ring supports 12" to 14" (30.5 cm to 35.6 cm) Wok pans and can be flipped over to become a flat grate for use with flat-bottomed cookware. IMPORTANT: The InstaWok™ Ring must be in place when using the TripleTier™ Flame Burner. To Use the InstaWok™ Ring: 1. Check that the control knob is in the OFF position and the grate is completely cool before handling. 2. Remove grate from cooktop and flip the grate over so that the wok supports are pointing up. A B E C D A. TripleTier™ Flame Burner Caps B. Burner base C. Alignment pins D. Igniter E. Gas tube opening A C B D A. InstaWok™ Ring B. Grid base C. Wok supports pointing up D. Support guides 3. Place the wok Ring within the guides. 9