Konica Minolta A00F011 Service Manual - Page 76
Transfer belt cleaning mechanism
View all Konica Minolta A00F011 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
magicolor 4650EN magicolor 4650DN Theory of operation Ver. 1.0 Nov. 2007 13. Transfer section (1st transfer) 13.3.6 Transfer belt cleaning mechanism • To scrape residual toner off the surface of the transfer belt, the transfer belt is provided with a cleaning blade. • The cleaning blade is in pressed contact with the transfer belt at all times. That is, it cleans the surface of the transfer belt as long as the belt turns. • The toner scraped off by the cleaning blade is collected to the middle of the transfer belt by the toner collecting screw. • The collected waste toner is conveyed through the waste toner collecting port located at the middle of the transfer belt unit and the suction transport unit, and brought to the waste toner box. Cleaning blade Toner collecting screw Transfer belt 4138to2035c1 Composition/Operation Waste toner collecting port Toner collecting screw A011T2C034DA 41