Konica Minolta C83hc High Chroma SD-513 User Manual - Page 14
Trimmer Unit TU-503
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2.1 Machine Configuration External view of Saddle Stitcher SD-513 No. Name 1 Saddle stitcher front door 2 Slit scrap box door 3 Trim scrap tray 4 Clamp section upper door 5 Clamp section 6 Clamp section handle 7 Folding outlet door 8 Stopper 9 Bundle exit tray extension 10 Secondary (sub) tray 11 Paper detection sensor 12 Tri-fold tray 13 Conveyance belt 14 Bundle exit tray 15 Bundle exit tray outlet 16 Output roller 2 Description Opens to allow removal of mishandled paper. When the optional Trimmer Unit TU-503 is mounted, opened for removal of slitting scraps in the slit scrap box. Withdrawn for removal of fore-edge trimmings in the trim scrap box. Opened for removal of mishandled paper inside the folding unit, and for cleaning the conveyance belts. Opened for removal of mishandled paper inside the fold conveyance section, fold & staple section, or halffold section. Open the saddle stitcher front door to access the clamp section. Hold the lock release lever while opening the clamp section. Hold the lock release lever while closing the clamp section. Opened for removal of mishandled paper inside the folding outlet. Prevents output sheets from falling off the bundle exit tray. Opened for delivery of output sheets onto the bundle exit tray. Holds output sheets that are delivered from the equipment attached to the right side of the machine without being processed in Fold & Staple, Multi Half-Fold, or Multi Tri-Fold mode. Also holds output delivered after performing creasing or 2-side slitting using Trimmer Unit TU-503 or Creaser Unit CR-101. Detects output sheets delivered on the conveyance belt to prevent from falling off. Holds sets output in Tri-Fold mode. Carries output sheets leftward. Holds fold & stapled or half-folded sets processed by the machine. Delivers fold & stapled or half-folded sets processed by the machine. Straightens fold & stapled or half-folded sets processed by the machine. Saddle Stitcher SD-513 2-5