Konica Minolta C83hc High Chroma SD-513 User Manual - Page 176
Adjustable range: -20 To shorten to +20 To lengthen 1 step = 0.1 mm
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
5.12 [Saddle Stitcher Adjustment] - [Crease Position Adjustment] 5 5 Load the paper size selected in step 3 into the tray, then select that tray key. 6 Press Start on the control panel. A sample pattern will be output. 7 Check the misalignment between the fold and crease of the output sheet. 8 Exit the print mode to return to the PB Cover Crease Position Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [Close]. % In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit PrintMode]. 9 If adjustment is required, select [Crease Line 1] or [Crease Line 2] and use the touch panel keypad or control panel keypad to enter the setting data. % Adjustable range: -20 (To shorten) to +20 (To lengthen) (1 step = 0.1 mm) % Use [+-] to specify the value to be positive or negative. % Adjust the distance between the paper edge in the top side of the perfect bind cover and the crease position. 10 Press [Set] to change the current data. 11 Repeat the steps from 4 to 10 until the desired result is obtained. 12 Press [Return] to restore the Crease Position Adjustment Menu Screen. Saddle Stitcher SD-513 5-47