Konica Minolta C83hc High Chroma SD-513 User Manual - Page 149
Press [Return] to restore the Staple Center Position Adjustment Menu Screen.
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
5 [Saddle Stitcher Adjustment] - [Staple Center Adjustment] 5.2 7 Measure the distance from the edge to the center of the rear 2 positions of 4 Position Staple relative to paper size. 8 Exit the print mode to return to the Staple Center Position Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [Close]. % In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit PrintMode]. 9 If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data. % Adjustable range: -100 (To move rearward) to +100 (To move frontward) (1 step = 0.1 mm) % Use [+-] to specify the value to be positive or negative. 10 Press [Set] to change the current data. 11 Repeat the steps from 4 to 10 until the desired result is obtained. 12 Press [Return] to restore the Staple Center Position Adjustment Menu Screen. 5-20 Saddle Stitcher SD-513