Konica Minolta C83hc High Chroma SD-513 User Manual - Page 153
Staple Pitch of Front 2 Positions of 4 Position Staple
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
5 [Saddle Stitcher Adjustment] - [Staple Pitch Adjustment] 5.4 7 Check the staple pitch (a) of the sample. 8 Exit the print mode to return to the Staple Pitch Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [Close]. % In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit PrintMode]. 9 If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data. % Adjustable range: -20 (narrow) to +20 (wide) (1 step = 1.0 mm) % Use [+-] to specify the value to be positive or negative. 10 Press [Set] to change the current data. 11 Repeat the steps from 4 to 10 until the desired result is obtained. 12 Press [Return] to restore the Staple Pitch Adjustment Menu Screen. 5.4.2 Staple Pitch of Front 2 Positions of 4 Position Staple Adjust the staple pitch of the front 2 positions of 4 position staples determined by Saddle Stitcher SD-513. Objects of adjustment: Full Area (Offset for All Size), B4 w, 8K w, 11 e 17 w, A3 w, A3W w, B4W w, 11 e 17W w, Custom NOTICE With [Full Area] ([Offset for All Size]) selected, the entered value will be applied to all sizes. With a specific paper size selected, set value will be the sum of the entered value and the value previously specified for [Full Area] ([Offset for All Size]). 5-24 Saddle Stitcher SD-513