Konica Minolta C83hc High Chroma SD-513 User Manual - Page 178
Saddle Stitcher Adjustment] - [Flattening a Fold Frequency]
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
5.14 [Saddle Stitcher Adjustment] - [Flattening a Fold (Frequency)] 5 5.14 [Saddle Stitcher Adjustment] - [Flattening a Fold (Frequency)] Adjust the number of back-and-forth motion of the roller when forming the spine of saddle-stitched booklets by Folding Unit FD-504 mounted on Saddle Stitcher SD-513. 1 Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen. 2 Display the Flattening a Fold (Frequency) Adj. Screen. % In bizhub PRESS 1250/1250P/1052, press [02 Finisher Adjustment], [08 Saddle Stitcher Adjustment], and [13 Flattening a Fold (Frequency)] in sequence. % In bizhub PRESS C1070/C1070P/C1060/C71hc, press [04 Finisher Adjustment], [04 Saddle Stitcher Adjustment], and [13 Flattening a Fold (Freq.)] in sequence. % In bizhub PRESS C1100/C1085, press [03 Finisher Adjustment], [04 Saddle Stitcher Adjustment], and [13 Flattening a Fold (Freq.)] in sequence. 3 Press [Print Mode]. 4 Load 11 e 17 (A3) w paper into a tray, then select that tray key. 5 Press Start on the control panel. A sample pattern will be output. 6 Check the spine of the output booklet. 7 Exit the print mode to return to the Flattening a Fold (Frequency) Adj. Screen. % In bizhub PRESS 1250/1250P/1052, press [Close]. % In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit PrintMode]. 8 If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data. % Adjustable range: -5 (To decrease) to +5 (To increase) (1 step = 1) % Use [+-] to specify the value to be positive or negative. 9 Press [Set] to change the current data. 10 Repeat the steps from 3 to 9 until the desired result is obtained. 11 Press [Return] to restore the Saddle Stitcher Adjustment Menu Screen. Saddle Stitcher SD-513 5-49