Konica Minolta C83hc High Chroma SD-513 User Manual - Page 147
Display the Staple Center Position Adjustment Screen of 4 Position Staple Front 2 positions.
View all Konica Minolta C83hc High Chroma manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
5 [Saddle Stitcher Adjustment] - [Staple Center Adjustment] 5.2 2 Display the Staple Center Position Adjustment Screen of 4 Position Staple (Front 2 positions). % In bizhub PRESS 1250/1250P/1052, press [02 Finisher Adjustment], [08 Saddle Stitcher Adjustment], [01 Staple Center Adjustment], and [02 4 Position Staple (Front 2)] in sequence. % In bizhub PRESS C1070/C1070P/C1060/C71hc, press [04 Finisher Adjustment], [04 Saddle Stitcher Adjustment], [01 Staple Center Position], and [02 4 Position Staple (Front 2)] in sequence. % In bizhub PRESS C1100/C1085, press [03 Finisher Adjustment], [04 Saddle Stitcher Adjustment], [01 Staple Center Position], and [02 4 Position Staple (Front 2)] in sequence. 3 Select the size to be adjusted. 4 Press [Print Mode]. 5 Load the paper size selected in step 3 into the tray, then select that tray key. 6 Press Start on the control panel. A sample pattern will be output. 7 Measure the distance from the edge to the center of the front 2 positions of 4 Position Staple relative to paper size. 8 Exit the print mode to return to the Staple Center Position Adjustment Screen. % In bizhub PRESS 1250/1250P/1052, press [Close]. % In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085, press [Exit PrintMode]. 9 If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data. % Adjustable range: -100 (To move rearward) to +100 (To move frontward) (1 step = 0.1 mm) % Use [+-] to specify the value to be positive or negative. % Available range of the adjustment may vary depending on paper sizes. 10 Press [Set] to change the current data. 11 Repeat the steps from 4 to 10 until the desired result is obtained. 12 Press [Return] to restore the Staple Center Position Adjustment Menu Screen. 5-18 Saddle Stitcher SD-513