Konica Minolta KIP 7900 KIP 7900 User Guide - Page 14

1. 4 Specifications Subject Model Configuration Printing method Photoconductor Print speed Print head Resolution Print width Print length Warm up time First print time Fusing method Development method Exposure method Charging method Transfer method Separation method Input power Power consumption Acoustic noise Ozone Dimensions Weight Media Environmental condition for usage Interface Specification KIP 7900 Console Electro photography Organic Photoconductive Drum 160mm per second LED 600dpi Maximum 36" (914mm) Minimum Roll: 11" / 297mm Cut sheet (Portrait): 8.5" / 210mm Maximum (Standard) 6m (bond, 36" / A0 wide only) or "5 x Standard length" (bond) "2 x Standard length" (vellum) "1 x Standard length" (film) (Option) 24m or Unlimited Minimum 8.5" (210mm) NOTE: If the print is longer than the maximum listed above, its image quality or the reliability of paper feeding is not guaranteed. Less than 6 minutes (23 C / 74F, 60% RH and the rated voltage on Bond) 15.5 seconds (E from Roll 1) Roll Fuser Dry type with non-magnetic mono-component toner LED Corona Corona Corona 220V - 240V , 50/60Hz, 15A Maximum 3,600w Stand by 1.3kwh (Average) Printing 2.5kwh (Average) Cold sleep 14w or less 230V, 50/60Hz and Dehumidify Heater is ON less than 67db (Printing) less than 55db (Standby) less than 0.1ppm (Average) 1370mm (W) x 700mm (D) x 965mm (H) (w/o UI) 54" x 28" x 38" 1385mm (W) x 820mm (D) x 1590mm (H) (w/ UI) 55" x 33" x 63" Approx. 386 kg 851 lbs (Recommended Media) Plain Paper US Bond (PB-20) Tracing Paper US Vellum (XV-20) Film 4MIL (PF-4DME) Temperature: 10 to 32 C 50 to 90 F Humidity: 15 to 85% RH Ethernet (10 BASE-T, 100 BASE-TX, 1000 Base-T) (continued on the next page) 1-5 Chapter 1 Before Use