Konica Minolta KIP 7900 KIP 7900 User Guide - Page 36

Replacing Toner Cartridge

Page 36 highlights

2. 4 Replacing Toner Cartridge WARNING There is combustible powder in the toner cartridge. Do not burn up the used toner cartridge. Reference When the toner is empty, the UI Screen will display Toner Empty sign. Follow the later procedure (or as noted in the UI's User Guide) to replace the Toner Cartridge with a new one (genuine). NOTE (1) The KIP 7900 Toner Cartridge is embedded with the IC Tag for an exclusive use on KIP 7900. Even if a Toner Cartridge for other models is installed, the KIP 7900 does not operate with indicating Toner Empty sign or "Toner Cartridge not set correctly". (2) Once the Toner Cartridge becomes empty with the toner, the KIP 7900 recognizes its IC Tag information. The same Toner Cartridge can no more be installed onto the KIP 7900 after that. The KIP 7900 does not operate with indicating Toner Empty sign or "Toner Cartridge not set correctly" if once emptied Toner Cartridge is installed. (3) The KIP 7900 will indicate Toner Empty sign if an incorrect toner cartridge or no toner cartridge is installed to the printer. (4) At the machine's installation, some amount of initial toner powders will be supplied to the machine. Thus Toner Empty sign might appear slightly earlier for the first installed toner cartridge than usual. 1. Open the Manual Table. Manual Table 2. Pull out the Upper Frame Unit to your side (front) with holding both handles. Handle 2-13 Upper Frame Unit Chapter 2 Basic Operations

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67

Chapter 2
Basic Operations
2-13
2. 4
Replacing Toner Cartridge
1.
Open the Manual Table.
2.
Pull out the Upper Frame Unit to your side (front) with holding both handles.
WARNING
There is combustible powder in the toner cartridge.
Do not burn up the used toner cartridge.
Reference
When the toner is empty, the UI Screen will display Toner Empty sign.
Follow the later procedure (or as noted in the UI’s User Guide) to
replace the Toner Cartridge with a new one (genuine).
NOTE
(1) The KIP 7900 Toner Cartridge is embedded with the IC Tag for an exclusive use on KIP
7900. Even if a Toner Cartridge for other models is installed, the KIP 7900 does not
operate with indicating Toner Empty sign or “Toner Cartridge not set correctly”.
(2) Once the Toner Cartridge becomes empty with the toner, the KIP 7900 recognizes its IC
Tag information. The same Toner Cartridge can no more be installed onto the KIP 7900
after that. The KIP 7900 does not operate with indicating Toner Empty sign or “Toner
Cartridge not set correctly” if once emptied Toner Cartridge is installed.
(3) The KIP 7900 will indicate Toner Empty sign if an incorrect toner cartridge or no toner
cartridge is installed to the printer.
(4) At the machine’s installation, some amount of initial toner powders will be supplied to the
machine. Thus Toner Empty sign might appear slightly earlier for the first installed toner
cartridge than usual.
Manual Table
Handle
Upper Frame Unit