Konica Minolta ScanDIVA ScanDIVA User Guide - Page 40
Aging - 10min, Select 2. Aging - 10min on the pull-down list under Detail & Adjustment
View all Konica Minolta ScanDIVA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
ScanDIVA User's Guide 2.3 Aging - 10min This adjustment is to stabilize the lamp and the CCD. NOTE ! It will take time until the lamp is stable especially in the morning in winter. In such a case, repeat the "Aging - 10min" procedure at least twice. 1 Launch the application and the ScanDIVA TWAIN Driver. 2 Check "Adjustment" on the screen of the ScanDIVA TWAIN Driver. 3 Select "2. Aging - 10min" on the pull-down list under "Detail & Adjustment", and then click "Run". 4 Click "OK" on the confirmation screen. 3-10
ScanDIVA User’s Guide
3-10
2.3
Aging - 10min
This adjustment is to stabilize the lamp and the CCD.
NOTE
!
It will take time until the lamp is stable especially in the morning in
winter. In such a case, repeat the “Aging – 10min” procedure at least
twice.
1
Launch the application and the ScanDIVA TWAIN Driver.
2
Check “Adjustment” on the screen of the ScanDIVA TWAIN Driver.
3
Select “2. Aging - 10min” on the pull-down list under “Detail & Adjustment”,
and then click “Run”.
4
Click “OK” on the confirmation screen.