Konica Minolta ScanDIVA ScanDIVA User Guide - Page 67
Detail Screen, White Balance, Color Correction, Sharpness
View all Konica Minolta ScanDIVA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
5.3 Detail Screen 1 2 3 4 5 6 Chapter 3 ScanDIVA TWAIN Driver 1. White Balance: 2. Color Correction: 3. Sharpness: Selects Auto or Manual in White Balance correction. Auto: Whenever the image is read, the white balance is calculated and corrected. The correction might not operate correctly, depending on the condition of the original. Manual (Auto OFF): The correction is executed according to calculated numerical value in the setup adjustment. It should normally be set to "Manual (Auto OFF)". Sets Color Correction to either enabled or disabled. Enable: The hue is adjusted, and the image is output. It should normally be set to "Enable (ON)". Use Color Profile The color correction is effective in exclusive ICC profile when it turns "ON". The image output time is determined by the performance of the personal computer when Color Correction is set to "ON". The sharpness of the image can be adjusted in 5 levels. Noise Reduction The image noise is reduced. 3-37