Konica Minolta bizhub 3320 bizhub 3320 User Guide - Page 216

User's Guide Memory full, cannot print faxes From the printer control panel, select Continue to clear the message without printing. For non-touch- screen printer models, press to confirm. Note: Held faxes will attempt to print after the printer restarts. Memory full, cannot send faxes 1. From the printer control panel, select Continue to clear the message and cancel the fax job. For non- touch-screen printer models, press to confirm. 2. Do either of the following: - Reduce the fax resolution, and then resend the fax job. - Reduce the number of pages in the fax, and then resend fax job. Memory full [38] Try one or more of the following: • From the printer control panel, select Cancel job to clear the message. For non-touch-screen printer models, press to confirm. • Install additional printer memory. Network [x] software error [54] Try one or more of the following: • From the printer control panel, select Continue to continue printing. For non-touch-screen printer models, press to confirm. • Turn off the printer, wait for about 10 seconds, and then turn the printer back on. • Update the network firmware in the printer or print server. For more information, contact technical support. No analog phone line connected to modem, fax is disabled. Connect the printer to an analog phone line. Non-Printer Manufacturer [supply type], see User's Guide [33.xy] Note: The supply type can be toner cartridge or imaging unit. The printer has detected a Non-Printer Manufacturer supply or part installed in the printer. - 216 -