Konica Minolta bizhub 4020 bizhub 4020 User Guide - Page 177

Use Eco-Mode Off Energy Energy/Paper Paper ADF Loaded Beep Enabled Disabled Quiet Mode Off On Run Initial setup Yes No User's Guide To Minimize the use of energy, paper, or specialty media. Notes: • Off is the factory default setting. This resets the printer to its factory default settings. • Energy minimizes the power used by the printer. Performance may be affected, but print quality is not. • Energy/Paper minimizes the use of power and of paper and specialty media. • Paper minimizes the amount of paper and specialty media needed for a print job. Performance may be affected, but print quality is not. Specify whether or not the ADF sounds a beep when paper is loaded. Note: Enabled is the factory default setting. Reduce the amount of noise produced by the printer. Notes: • Off is the factory default setting. This supports the performance specifications for your printer. • On configures the printer to produce as little noise as possible. This is best suited for printing text and line art. • Selecting Photo from the printer driver may disable Quiet Mode and provide better print quality and full-speed printing. Run the setup wizard. Notes: • Yes is the factory default setting. • After completing the setup wizard by selecting Done at the country or region selection screen, the default becomes No. - 177 -