Konica Minolta bizhub 4020 bizhub 4020 User Guide - Page 288
Supply needed to complete job, Standard USB port disabled [56]
View all Konica Minolta bizhub 4020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 288 highlights
User's Guide Standard USB port disabled [56] From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press to confirm. Notes: • The printer discards any data received through the USB port. • Make sure the USB Buffer menu is not set to Disabled. Supply needed to complete job Do either of the following: • Install the missing supply to complete the job. • Cancel the current job. Too many flash options installed [58] 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet. 3. Remove the extra flash memory. 4. Connect the power cord to a properly grounded electrical outlet. 5. Turn the printer back on. Too many trays attached [58] 1. Turn off the printer. 2. Unplug the power cord from the electrical outlet. 3. Remove the extra trays. 4. Connect the power cord to a properly grounded electrical outlet. 5. Turn the printer back on. Unformatted flash detected [53] Try one or more of the following: • From the printer control, select Continue to stop the defragmentation and continue printing. For non- touch-screen printer models, press to confirm. • Format the flash memory. - 288 -