Konica Minolta bizhub PRO 1051 bizhub PRO 1051/1200 Quick Guide - Page 110
Other Finisher Adjustments can be set by the similar procedures above, mentioned. For details
![]() |
View all Konica Minolta bizhub PRO 1051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Finisher Adjustment 5. If necessary, set the values, respectively. Chapter 5: Troubleshooting 6. Touch [Print Mode]. 7. Press [Start]. 8. Until getting the adequate width, repeat above mentioned steps. 9. Touch [Return] after adjustment. • Other Finisher Adjustments can be set by the similar procedures above mentioned. For details, refer to User's Guide (POD Administrator's Reference). 5-20
![](/manual_guide/products/konica-minolta-bizhub-pro-1051-bizhub-pro-10511200-quick-guide-00fee53/110.png)
Finisher Adjustment
Chapter 5: Troubleshooting
5-20
•
Other Finisher Adjustments can be set by the similar procedures above
mentioned. For details, refer to User’s Guide (POD Administrator’s Refer-
ence).
5.
If necessary, set the values, respectively.
6.
Touch [Print Mode].
7.
Press [Start].
8.
Until getting the adequate width, repeat above mentioned
steps.
9.
Touch [Return] after adjustment.