Konica Minolta bizhub PRO 1051 bizhub PRO 1051/1200 Quick Guide - Page 117
About the details of settings, refer to User's Guide POD Administrator's, Reference., Appendix - power requirements
View all Konica Minolta bizhub PRO 1051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Chapter 6: Appendix 6. Enter the IP Address on the screen displayed by touching of [Change] for [IP Address] and touch [OK]. About the network setting of this machine 1 7. Enter the Subnet Mask on the screen dis- 2 played by touching of [Change] for [Subnet Mask] and touch [OK]. 8. Enter the Default Gate- way on the screen displayed by touching of 3 [Change] for [Default Gateway] and touch [OK]. 9. Set the other setting as required, and touch [OK]. 10.Touch [Exit] to close the Controller NIC Setting screen. 4 11.Turn OFF/ON the power of the copier. p.1-2 • About the details of settings, refer to User's Guide (POD Administrator's Reference). 5 6 Appendix 7 6-3
Chapter 6: Appendix
About the network setting of this machine
6-3
6
Appendix
•
About the details of settings, refer to User’s Guide (POD Administrator’s
Reference).
6.
Enter the IP Address on
the screen displayed by
touching of [Change]
for [IP Address] and
touch [OK].
7.
Enter the Subnet Mask
on the screen dis-
played by touching of
[Change] for [Subnet
Mask] and touch [OK].
8.
Enter the Default Gate-
way on the screen dis-
played by touching of
[Change] for [Default
Gateway] and touch
[OK].
9.
Set the other setting as required, and touch [OK].
10.
Touch [Exit] to close the Controller NIC Setting screen.
11.
Turn OFF/ON the power of the copier.
p.1-2