Konica Minolta bizhub PRO 1051 bizhub PRO 1051/1200 Quick Guide - Page 118
SMB Setting, To enable SMB setting is necessary to use the SMB printing function and
View all Konica Minolta bizhub PRO 1051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
About the network setting of this machine Chapter 6: Appendix SMB Setting To enable SMB setting is necessary to use the SMB printing function and the Scan to SMB function. 1. Touch [04 Network Settings] on the Administrator setting menu. 2. Touch [02 Controller NIC Setting]. 3. Touch [06 SMB Setting]. ● In case of use of the SMB printing function: Go to Step 4 4. Touch [Enable] for [Print Setting]. ● In case of use of the Scan to SMB function: Go to Step 8 5. Enter the NetBIOS Name on the screen displayed by touching of [Change] for [NetBIOS Name] and touch [OK], if necessary. 6. Enter the Print Service Name on the screen displayed by touching of [Change] for [Print Service Name] and touch [OK]. [Next Page] [Next Page] 6-4
About the network setting of this machine
Chapter 6: Appendix
6-4
SMB Setting
To enable SMB setting is necessary to use the SMB printing function and the
Scan to SMB function.
1.
Touch [04 Network Settings] on the Administrator setting
menu.
2.
Touch [02 Controller NIC Setting].
3.
Touch [06 SMB Setting].
●
In case of use of the SMB
printing function: Go to
Step 4
●
In case of use of the Scan
to SMB function: Go to
Step 8
4.
Touch [Enable] for [Print
Setting].
5.
Enter the NetBIOS
Name on the screen
displayed by touching
of [Change] for [Net-
BIOS Name] and touch
[OK], if necessary.
6.
Enter the Print Service
Name on the screen
displayed by touching
of [Change] for [Print
Service Name] and
touch [OK].
[Next Page]
[Next Page]