Kyocera ECOSYS P5021cdw Kyocera Command Center RX User Guide Rev-8.2016.3 - Page 98
Notification/Report, Notification/Report Settings
View all Kyocera ECOSYS P5021cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Management Settings System Code 1 Enter the System Code 1 from 0000 to FFFF. Service Code 1 Enter the Service Code 1 from 0000 to FFFF. Number of Blocks in Use. Enter the number of blocks in use from 1 to 255. System Code 2 Enter the System Code 2 from 0000 to FFFF. Service Code 2 Enter the Service Code 2 from 0000 to FFFF. Number of Blocks in Use. Enter the number of blocks in use from 1 to 255. Configure the System Code 2 as necessary. 5. Click Submit button. Notification/Report This section includes advanced settings for attentions and reports. Notification/Report Settings 1. Click Notification/Report under Management Settings on the navigation menu. The Notification/Report Settings page opens. 2. You can configure settings for Management Report. This item is shown only when an optional Fax kit is installed. Outgoing FAX Report Select either On or Off. Incoming FAX Report Select either On or Off. 3. You can configure settings for Send Result Report. E-mail/Folder From the drop-down list, select Off, On, or Error Only. If an error occurs during transmission, Error Only allows a transmission result reported by e-mail and stored in the folder. FAX / i-FAX From the drop-down list, select Off, On, Error Only, or Specify Each Job. If an error occurs during transmission, Error Only allows printing a transmission result. 94 Embedded Web Server