Kyocera FS 2000D FS-2000D/3900DN/4000DN Operation Guide Rev-1.3 (Basic Edition - Page 38
Replacing the Toner Container
View all Kyocera FS 2000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Maintenance change to Ready. To restart printing, you must press [GO] and make the printer ready. In either case, replace the toner container, refer to Toner Container Replacement on page 3-3. Replacing the Toner Container NOTE: During toner container replacement, temporarily put storage media and computer supplies (such as floppy disks) away from around the toner container. This is to avoid damaging media by the magnetism of toner. This section explains how to replace the toner container. When replacing the toner container, always replace the waste toner box at the same time. If this box is full, the printer may be damaged or contaminated by the waste toner that may spill over the box. NOTE: You do not have to turn printer power off before starting the replacement. Any data that may be under printing process in the printer will be deleted if you turn printer power off. 1 Open the top cover. 3-4 OPERATION GUIDE