Kyocera FS 2000D FS-2000D/3900DN/4000DN Operation Guide Rev-1.3 (Basic Edition - Page 40
Replacing the Waste Toner Box
View all Kyocera FS 2000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Maintenance 7 Set the new toner container in the printer and push down on the top of the toner container to install it firmly in place as shown in the figure below. 8 Close the top cover. Proceed to the next section. Replacing the Waste Toner Box When replacing the toner container, the used waste toner box in the printer should also be replaced with the new one from the new toner kit. A new waste toner box is included with the toner kit. The printer will not operate without replacing the waste toner box. 1 Open the left cover. While holding the waste toner box, press the lock lever and then gently remove the waste toner box. Lock Lever NOTE: Remove the waste toner box as gently as possible so as not to scatter the toner inside. Do not let the opening of the waste toner box face downward. 3-6 OPERATION GUIDE