Kyocera FS 2000D FS-2000D/3900DN/4000DN Operation Guide Rev-1.3 (Basic Edition - Page 60

Rear Unit, Paper Feeder, Envelope Feeder, Bulk Paper Feeder - fuser

Get Kyocera FS 2000D - B/W Laser Printer PDF manuals and user guides View all Kyocera FS 2000D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Troubleshooting Rear Unit 1 If paper is not completely ejected into the output tray, open the rear unit. 2 Open the fuser cover and remove the jammed paper by pulling it out. NOTE: If you cannot find a paper jam, try checking inside the rear of the printer. CAUTION: The fuser unit inside the printer is hot. Do not touch it with your hands as it may result in burn injury. 3 Close the rear unit. The printer warms up and resumes printing.out. Paper Feeder Paper is jammed at optional paper cassette 2 (to 4). Refer to the Installation Guide for the optional paper feeder and remove the jammed paper. Envelope Feeder Paper is jammed at the optional envelope feeder. Remove the jammed paper using the same procedure as for a jam at the MP Tray. Then, open and close the paper transfer unit. For details, refer to the User's Manual for the envelope feeder. Bulk Paper Feeder Paper is jammed at the optional bulk paper feeder. Detach the bulk paper feeder from the printer by sliding with the rail away from the printer, holding the bulk paper feeder by both hands. If paper is partially fed out from the feeder's output slot, pull the paper out by hand. 4-16 OPERATION GUIDE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Troubleshooting
4-16
OPERATION GUIDE
Rear Unit
1
If paper is not completely ejected
into the output tray, open the rear
unit.
2
Open the fuser cover and remove
the jammed paper by pulling it out.
NOTE:
If you cannot find a
paper jam, try checking inside
the rear of the printer.
CAUTION:
The fuser unit inside the printer is hot. Do not touch it with your
hands as it may result in burn injury.
3
Close the rear unit. The printer
warms up and resumes
printing.out.
Paper Feeder
Paper is jammed at optional paper cassette 2 (to 4). Refer to the
Installation Guide for the optional paper feeder and remove the jammed
paper.
Envelope Feeder
Paper is jammed at the optional envelope feeder. Remove the jammed
paper using the same procedure as for a jam at the MP Tray. Then, open
and close the paper transfer unit. For details, refer to the User’s Manual for
the envelope feeder.
Bulk Paper Feeder
Paper is jammed at the optional bulk paper feeder. Detach the bulk paper
feeder from the printer by sliding with the rail away from the printer, holding
the bulk paper feeder by both hands. If paper is partially fed out from the
feeder's output slot, pull the paper out by hand.