LG BH200 Owner's Manual (English) - Page 38

BH200-N_AUSALLK_ENG 4/18/08 9:28 AM Page 38 Network Update You can update the Player using the latest software to enhance the products operation and/or add new features. You can update the firmware by connecting the unit directly to the S/W update server. Step 1: Check the Network Connection See pages 17. Step 2: Configuring Network Settings See pages 23. Step 3: Checking Network Configuration 1. Select [NETWORK] on the [Setup] menu. 2. Select [IP Mode] option on the [NETWORK] menu. 3. Check the Network status indicator shown above the menu. (The Network status indicator changes according to Network configuration.) 4. On the UPDATE window, press B or ENTER to check for the newest update. Caution: Pressing ENTER while checking for the update will end the process. Note: If there is no update available, the Message, "No update is found." appears. Press ENTER to return to the Home Menu. 5. If newer version exists, the message "A new update is found. Do you want to download it?" appears. 6. Select OK to download the update. (Selecting [CANCEL] will end the update.) 7. The player starts downloading the newest update from the server. (Downloading will take about 80 seconds at the network speed of 4Mbps Speed.) 8. When downloading is completed, the message, "Download is complete. Do you want to update?" appears. Current software version Able to use network Testing Network Unable to use network Step 4: Updating Firmware Cautions: • Before updating the firmware in your player, remove any disc and USB Flash Drive from the player. • Before updating the firmware in your player, turn the player off and then turn it back on. • During the firmware update procedure, do not turn off the player or disconnect AC power, or do not press any button. • If you cancel the update. turn off the power and turn it on for stable performance. 1. Press Home 2. Use b / B to select the [Setup] then press ENTER. 3. Select [Network Update] option on the [OTHERS] menu then press B or ENTER. Downloaded software version 9. Select OK to start updating. (Selecting [CANCEL] will end the update and downloaded file will not be re-usable. To update firmware the next time, the network update procedure has to be started from the beginning again.) Caution: Do not turn off the power during the firmware update. Note: If the firmware includes the driver update, disc tray may open during the process. 10. When update is completed, the message, "Update is complete." will appear, and the power will turn off automatically after 5 seconds. 11. Turn the power back on. The system now operates with the new version. 12. After completing the update process, repeat procedures 1-4 in Step 4 and check if there are no more updates available. 38