LG LMCN185HV Installation Instructions - Page 20
Installation of wired Remote Controller
View all LG LMCN185HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installation Installation of wired Remote Controller 1 Put the installation paper on the place and determine the position and height of the fixing screws of the wired remote controller. • Refer to the printed side of the installation paper. The position of the fixing screws 2 Plug the connecting cable into the indoor unit. • The product is being shipped with the cable connected only to the remote controller. Fix the connecting cable with the cable rack. C01K CN-M C CN-ZONE CN-REMO J15 J14 LO1K CN-DISP IC01A LO1D C07D Main indoor unit Red Yellow Brown LO2K Side of remote Controller Side of Indoor Unit Main frame 3 Remove the installation paper before installing the Fixing the remote controller so that it can fit at the right place. remote controller * Do not embed the remote controller into the wall. (It may cause the breakdown of the temperature sensor.) * If you want to install a number of remote controller at the same place in a vertical line, install them at regular intervals of 20mm(1/32 inch). (It may cause the breakdown of the temperature sensor.) 20mm(1/32 inch) * Do not install the cable with a distance of 50m(164ft) or longer. (This can cause communication error.) * When installing the cable, check whether the connector between the remote controller and the product is installed properly. The connector will not be connected when installed in opposite sides. ❏ Supply the power after connecting wired remote controller. When you need to change wired remote controller, switch off the main power and change it. If the wired remote controller is changed before switching off the main power, the option function of the indoor unit can't be used. (option function like "slo" fan speed selection) 20 Multi Air Conditioner