LG LMCN185HV Installation Instructions - Page 24
Setting the Central-Control Address
View all LG LMCN185HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installation Setting the Central-Control Address Please set the address while using the central controller. You don't need to set address if you don't use central controller. 1 If you want to set the address on the display panel, press both temperature control buttons (L/M) same time for three seconds. PQRCUCS0C Defrost Preheat Out door Room Temp Total on Central Run MODE TEMP FAN SPEED TEMP 2 Press the temperature-increasing button to change the group number. Press the temperature-decreasing button to change the indoor unit number. e.g. As shown on the left side panel, it displays 23. Group No. : 2 Indoor Unit No. : 3 3 Set the address by pressing both temperature control buttons again(s/t) at the same time for three seconds. MODE TEMP FAN SPEED TEMP Group No. Indoor Unit No. • If you connect the indoor unit to the central controller, you should set the network address of the indoor unit so that the central controller could recognize it. • The center-control address is composed of the group number and the indoor-unit number. Note : The remote controller displays 'HL' if central controller has locked the remote controller . 24 Multi Air Conditioner