LG LMCN185HV Installation Instructions - Page 25
ESP Function - model
View all LG LMCN185HV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
ENGLISH Installation ESP Function E.S.P function is setting the volume of each fan speed. It is for the convenience of installation. It is recommended that you should not use this function while using the remote controller. 1 Press the mode button and the temperature increasing button(L) same time for three seconds. PQRCUCS0C Defrost Preheat Out door Room Temp Total on Central Run MODE TEMP FAN SPEED TEMP 2 Set the volume of each fan speed(Low, Medium, Hi) by using the temperature control button. Press the fan speed button to select the fan speed. The value of E.S.P can be adjusted from 1 to 255. 3 If you press the On/Off button while setting the ESP function, it will be canceled. (The picture on the left side is the example of setting the Hi wind to ESP 10.) 4 Press the mode button and the temperature increasing button (L) same time for three seconds. Then the ESP setting will be activated after the temperature display flashes three times. EX) Lo Med Static pressure(mmAq) Model name Step(H/M/L) AMNW09GB1A0 [LMDN095HV] 8.5 CMM(300cfm) 7.5 CMM(265cfm) 6.5 CMM(230cfm) AMNW12GB1A0 [LMDN125HV] 9.5 CMM(336cfm) 8.5 CMM(300cfm) 7.5 CMM(265cfm) AMNW18GB2A0 [LMDN185HV] 15 CMM(530cfm) 13.5 CMM(477cfm) 11.5 CMM(406cfm) 200 100 Setting the Low wind to 210 Setting the Medium wind to 175 ❈ The E.S.P value is set at the proper value at the factory. So it is highly recommended that you should not change the E.S.P value at your discretion. 0 1 2 3 4 Setting value 75 84 94 104 114 69 77 88 99 110 62 71 83 95 106 82 90 99 109 118 75 84 94 104 114 69 77 88 99 110 90 97 105 114 122 82 90 99 109 119 75 84 93 103 114 Installation Manual 25