LG LWS3081ST Owner's Manual (English) - Page 14

TELESCOPIC RACK The sliding shelf telescopic rack can be used in any rack position. Open Position B A Installing the Telescoping Rack Step. 1 Start with the rack in the "Closed" position. Place one hand in the front near the center, and place your other hand near the right rear corner. Step. 2 Carefully insert rack between the rack guides, to the back of the oven until the shelf slides into place. Rack guides A. Telescopic rack B. Frame Closed and Engaged Position Step. 3 Once the rack is secured in the back, pull the entire rack forward until the rack locks into place. NOTE: Be sure that the rack is securely positioned and level before use. A B A. Telescopic rack B. Frame CAUTION • DO NOT cover racks with aluminum foil. - This will result in poor baking caused by interrupted heat distribution. • Always arrange oven racks when the oven is cool. • Do not place aluminum foil or any other material on the oven bottom. • Remove all racks including the telescoping rack and frame when using a self clean cycle. Removing Telescopic Rack Step. 1 With the rack in the "Closed" position, grasp the front of the rack and frame and lift up. Slowly push the rack towards the back wall. Step. 2 After pushing rack/ frame towards the back wall lift the rear of the rack, and pull the entire rack and frame out between the rack guides. 14