LG LWS3081ST Owner's Manual (English) - Page 32
When the self-clean cycle is done, After the self-clean cycle, To change the setting during
UPC - 048231316385
View all LG LWS3081ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
SELF-CLEAN (cont.) To change the setting during the operation of this self-clean feature: 11:35 am ᕡ Touch Options. Self Clean Clean Level Clean Time Normal 3H00 Options Light Normal Heavy 2Hours 3Hours 4Hours ᕢ Touch Light for light soil or Normal for average soil or Heavy for heavy soil. ᕣ Touch START to confirm the change. NOTE: When using the self-clean feature: • A self-clean cycle cannot be started if Control Lock feature is active. • Once the SELF CLEAN is set, the oven door will lock automatically. You will not be able to open the oven door until the oven is cooled. The lock will release automatically. • Once the door has been locked the DOOR LOCKED indicator light will stop flashing and remain on. Allow about 15 seconds for the oven door lock to engage. • The oven can be set the cycle time and start time again with touching the Options key during the self-clean feature is operating if it is necessary. When the self-clean cycle is done • It will not be possible to open the oven door until oven temperature has cooled. After the self-clean cycle • You may notice some white ash in the oven. Wipe it off with a damp cloth after the oven cools. These deposits are usually a salt residue that cannot be removed by the clean cycle. If the oven is not clean after one clean cycle, repeat the cycle. • If oven racks were left in the oven and do not slide smoothly after a clean cycle, wipe racks and rack supports with a small amount of vegetable oil to make them glide easier. • Fine lines may appear in the porcelain because it went through heating and cooling. This is normal and will not affect performance. 32