LG UBK80 Owners Manual - Page 15
Advanced Setting
View all LG UBK80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
1. Select [Connection Setting] option in the [Settings] menu then press ENTER (b). 2. Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted. Connecting 15 2. Select [Next] and press ENTER (b) to apply network settings. Network connection status is displayed on the 2 screen. Connecting Network will automatically be connected to the unit. 3. Press ENTER (b) while [OK] is highlighted to finish the wired network settings. Advanced Setting If you want to set the network settings manually, use w/s to select [Advanced Setting] on the [Network Setting] menu and press ENTER (b). 1. Use w/s/a/d to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. ,,Note If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using w/s/a/d and numerical buttons.