Lantronix EDS4100 EDS - User Guide - Page 49
Network 1 (eth0) Interface Configuration, To view and con network interface settings, Network
View all Lantronix EDS4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
8: Network Settings Network 1 (eth0) Interface Configuration This page shows the configuration settings for the Ethernet connection and lets you change these settings. To view and configure network interface settings: 1. Select Network on the menu bar, if you are not already in the Network web page. 2. Select Interface > Configuration submenus at the top of the page. The Network 1 (eth0) Interface Configuration page appears. Figure 8-2 Network 1 (eth0) Interface Configuration 3. Enter or modify the following settings: Network 1 Interface Configuration Settings BOOTP Client Table 8-3 Network Interface Configuration Description Select On or Off. At boot up, the device will attempt to obtain an IP address from a BOOTP server. Notes: Overrides the configured IP address, network mask, gateway, hostname, and domain. When DHCP is On, the system automatically uses DHCP, regardless of whether BOOTP Client is On. EDS User Guide 49