Lantronix EDS4100 EDS - User Guide - Page 77
Network Terminal Configuration, Terminal on Network Configuration, Terminal Type
View all Lantronix EDS4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
10: Terminal and Host Settings Network Terminal Configuration To configure menu features applicable to CLI access via the network: 1. Select Terminal on the menu bar, if you are not already in the Terminal web page. 2. Select Network at the top of the page. The Configuration submenu is automatically selected. The Terminal Configuration page appears for the network. Figure 10-3 Terminal on Network Configuration 3. Enter or modify the following settings: Terminal on Network Configuration Settings Terminal Type Login Connect Menu Exit Connect Menu Echo Table 10-4 Terminal on Network Configuration Description Enter text to describe the type of terminal. The text will be sent to a host via IAC. Note: IAC means, "interpret as command." It is a way to send commands over the network such as send break or start echoing. Select the interface to display when the user logs in. Choices are: Enabled = shows the Login Connect Menu. Disabled = shows the CLI Select whether to display a choice for the user to exit the Login Connect Menu and reach the CLI. Choices are: Enabled = a choice allows the user to exit to the CLI. Disabled = there is no exit to the CLI. Applies only to Connect Mode Telnet connections, not to Accept Mode. Only disable Echo if your terminal echoes, in which case you will see double of each character typed. 4. Click Submit to save changes. EDS User Guide 77