Lantronix EDS8PS EDS - Command Reference - Page 135
host 2 config-host:2 level commands, host 3 tunnel-connect-host:4:3 level commands
View all Lantronix EDS8PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
5: Commands and Levels write host 2 (config-host:2) level commands clrscrn default protocol default remote port exit host name no name no remote address no ssh username protocol ssh protocol telnet remote address remote port show show history ssh username write host 3 (tunnel-connect-host:4:3) level commands address aes decrypt key aes decrypt key text aes encrypt key aes encrypt key text Stores the current configuration in permanent memory. Clears the screen. Restores the default value of the protocol (Telnet). Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. Exits to the configuration level. Change to config host level Sets the name of the host. = name of the host. Clears the name of the host. Clears the remote address of the host. Clears the SSH username associated with the host. Sets the protocol to SSH. Sets the protocol to Telnet. Sets the IP address of the remote host to connect to when this host is selected on the login connect menu. = IP address. Sets the remote port used to connect to the host. = port to be used. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Sets the username for logging into the host via SSH. = username. Stores the current configuration in permanent memory. Sets the remote host to establish tunneling connections with. = IP address or host name of the remote host. Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. Sets the connect tunnel AES decrypt key with up to 16 bytes. Each byte is represented by a single character. Note that quotes must enclose the value if it contains spaces. Sets the connect tunnel AES encrypt key with up to 16 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces. Sets the connect tunnel AES encrypt key with up to 16 EDS Command Reference 135