Lantronix EDS8PS EDS - Command Reference - Page 192
link config-ethernet:eth0 level commands, log config-diagnostics-log level commands
![]() |
View all Lantronix EDS8PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
xoff char xon char link (config-ethernet:eth0) level commands clrscrn default duplex default speed duplex auto duplex full duplex half exit show show history speed 10 speed 100 speed auto write log (config-diagnostics-log) level commands clrscrn default max length default output default severity level exit max length output disable output filesystem output line severity level debug severity level error severity level information severity level notice severity level warning show show history write lpd (lpd) level commands EDS Command Reference 5: Commands and Levels Sets the xoff character for use with software flow control on this line. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Sets the xon character for use with software flow control on this line. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Clears the screen. Restores the default duplex setting, which is auto. Restores the default speed setting, which is autonegotiate. Sets duplex mode to auto. Sets duplex mode to full. Sets duplex mode to half. Exit back to interface configuration level Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Sets the speed of the Ethernet link to 10 Mbps. Sets the speed of the Ethernet link to 100 Mbps. Sets the speed of the Ethernet link to auto-negotiate. Stores the current configuration in permanent memory. Clears the screen. Restores the factory default maximum Log file size. Disables log output. Log all events. Exits to the next higher level. Sets the maximum size in Kbytes for the Log file. Enables log to filesystem. Enables log to serial line. Could not find VarID 438 entry 3 in file http/config/varid_help.mtxt Log all events. Log only Error and more severe events. Log only Information and more severe events. Log only Notice and more severe events. Log only Warning and more severe events. Shows the current configuration. Displays the last 20 commands entered during the current CLI session. Stores the current configuration in permanent memory. 192
![](/manual_guide/products/lantronix-eds8pr-eds-command-reference-32f14d3/192.png)