Lantronix EDS8PS EDS - Command Reference - Page 62
con config level commands, connect tunnel-connect:4 level commands
View all Lantronix EDS8PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
configure (config) level commands arp cli clrscrn diagnostics exit ftp host http icmp if ip ip filter kill ssh kill telnet lpd modbus query port rss rtc show show history show lines smtp snmp syslog tcp terminal terminal network tftp udp vip write connect (tunnel-connect:4) level commands block network disable block network enable EDS Command Reference 5: Commands and Levels Changes to the command level for ARP configuration and status. Change to menu level for CLI configuration and status Clears the screen. Enters the diagnostics level. Exits to the enable level. Enters the ftp level. Change to config host level Enters the http level. Changes to the command level for ICMP configuration and status. Changes to the interface configuration level. Changes to the command level for IP configuration and status. Enters the config-filter level. Kills SSH session with index from "show sessions" Kills Telnet session with index from "show sessions" Enters the configure lpd level. = number of the line (lpd serial port) to be configured. Changes to the modbus configuration level. Enters the query port level. Change to menu level for RSS configuration and status Change to menu level for Real Time Clock configuration and status Displays system information. Displays the last 20 commands entered during the current CLI session. Displays line information. Changes to the command level for SMTP configuration and status. Enters the snmp level. Enters the syslog level. Changes to the command level for TCP configuration and status. Enters the configure-terminal level. = number of the terminal line (serial port) to be configured. Enters the configure-terminal level for the network. Enters the tftp level. Changes to the command level for UDP configuration and status. Change to menu level for VIP configuration and status Stores the current configuration in permanent memory. Forwards (tunnels) network data in connect mode tunneling. Discards all data coming in from the connect mode tunnel before forwarding 62