Lantronix EDS8PS EDS - Command Reference - Page 216
terminal network config-terminal:network level commands
View all Lantronix EDS8PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
5: Commands and Levels lpd Enters the configure lpd level. = number of the line (lpd serial port) to be configured. no send break Removes the configured send break character. preview connect menu Shows the layout of the connect menu with current settings. send break Sets the optional send break character. = the character. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. terminal Enters the configure-terminal level. = number of the terminal line (serial port) to be configured. terminal network Enters the configure-terminal level for the network. terminal type Sets the terminal type. tunnel Enters the tunnel level. = number of the tunnel line (serial port) to be configured. write Stores the current configuration in permanent memory. terminal network (config-terminal:network) level commands break duration Sets how long a break should last when it is being sent to the line. = number of milliseconds. clrscrn Clears the screen. default break duration Restores the break duration to the default value (500 ms). default terminal type Sets the default terminal type, "UNKNOWN". echo disable Disables echoing of characters received on the line back to the line. echo enable Enables echoing of characters received on the line back to the line. exit Exits to the configuration level. exit connect menu disable On the login connect menu, removes the menu item allowing the user to exit to the CLI. exit connect menu enable On the login connect menu, inserts the menu item allowing the user to exit to the CLI. line Enters the line level. = number of the line (serial port) to be configured. login connect menu disable Disables the login connect menu, so a user will get the CLI immediately after logging in. login connect menu enable Enables the login connect menu, so a user will get the menu rather than the CLI immediately after logging in. lpd Enters the configure lpd level. = number of the line (lpd serial port) to be configured. EDS Command Reference 216