Lantronix EDS8PS EDS - Command Reference - Page 218
tunnel 1 tunnel:1 level commands, Enters the disconnect level for this tunnel.
![]() |
View all Lantronix EDS8PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
secondary destination show show history state disable state enable write tunnel 1 (tunnel:1) level commands accept auto show statistics clear counters clrscrn connect disconnect exit line lpd modem no clear counters packing serial show history show statistics terminal terminal network tunnel write tunnel 2 (tunnel:2) level commands accept auto show statistics clear counters clrscrn connect disconnect exit line lpd modem EDS Command Reference 5: Commands and Levels Sets the secondary SNMP trap host. = IP address of host running the SNMP trap. Shows the current configuration. Displays the last 20 commands entered during the current CLI session. Disables the sending of SNMP trap messages. Enables the sending of SNMP trap messages. Stores the current configuration in permanent memory. Enters the accept level for this tunnel. show connection statistics Zeros all tunnel counters Clears the screen. Enters the connect level for this tunnel. Enters the disconnect level for this tunnel. Exits to the enable level. Enters the line level. = number of the line (serial port) to be configured. Enters the configure lpd level. = number of the line (lpd serial port) to be configured. Enters the modem level for this tunnel. Unzeros all tunnel counters Enters the packing level for this tunnel. Enters the serial level for this tunnel. Displays the last 20 commands entered during the current CLI session. show connection statistics Enters the configure-terminal level. = number of the terminal line (serial port) to be configured. Enters the configure-terminal level for the network. Enters the tunnel level. = number of the tunnel line (serial port) to be configured. Stores the current configuration in permanent memory. Enters the accept level for this tunnel. show connection statistics Zeros all tunnel counters Clears the screen. Enters the connect level for this tunnel. Enters the disconnect level for this tunnel. Exits to the enable level. Enters the line level. = number of the line (serial port) to be configured. Enters the configure lpd level. = number of the line (lpd serial port) to be configured. Enters the modem level for this tunnel. 218
![](/manual_guide/products/lantronix-eds8pr-eds-command-reference-32f14d3/218.png)